Submit a request and we will contact you
By submitting a request, you agree to the privacy policy
Leave a contact to get access to the catalog
The catalog will be available immediately after filling in the fields.
By submitting a request, you agree to the privacy policy
Provento Microclimate Control Equipment
— efficient and reliable solutions
Fans, heaters, air conditioners and other systems
of electrical equipment in any conditions.
for reliable operation
Get catalog
Our products —
available in stock and made to order
/ PRODUCTS
Our products — available in stock and made to order
Fans and exit filters
Современный дизайн, минимальные габариты, простота монтажа и обслуживания.
элемент в вентиляторе можно без использования инструментов за считанные секунды. Для установки в подготовленные вырезы не нужны дополнительные инструменты.
Например, заменить фильтрующий
Exit filters
Filter fans
1
Modern design, compact dimensions, and easy installation and maintenance. For example, the filter element in a fan can be replaced in seconds without using tools. No additional tools are required for installation in prepared cutouts.
2
/1
/2
Filter fans
Free airflow from 29 to 480 m³/h (with installed filter element). Reversible airflow is possible (the fan can be flipped). Stable pressure and constant airflow power ensure uniform heat dissipation from the cabinet.
Exit filters
Easy maintenance is ensured by a special front panel design that can be removed without tools. Replacing the filter pad takes only a few seconds. The special grille design, polyurethane foam sealing, and filter element ensure an IP54 protection rating. Plastic parts are made of ABS plastic in the standard color RAL7035. Rated voltage — 230 V. Temperature range: -10 °C to +55 °C.
Air conditioners
Built using modern electronic components and reliable, proven assemblies. Pre-filled with refrigerant and ready for installation. A simple control system allows the air conditioner to be programmed across a wide range of settings.
Side-mounted air conditioners
Roof-mounted air conditioners
1
2
/1
/2
Side-mounted air conditioners
Reliable in operation and easy to maintain. They help maintain the functionality of equipment inside electrical cabinets and minimize maintenance requirements. Cooling capacity: 300−2500 W Protection rating: IP54 Two independent air circuits prevent dust from entering the cabinet. Ambient temperature: -20 °C to +50 °C Adjustment range: +20 °C to +45 °C Rated voltage: 230 V
Roof-mounted air conditioners
Reliable and easy to maintain solutions that ensure stable operation of equipment inside electrical cabinets while minimizing maintenance. Cooling capacity: 500−2000 W Protection rating: IP54 Two independent air circuits prevent dust from entering the cabinet. Ambient temperature: -20 °C to +50 °C Adjustment range: +20 °C to +45 °C Rated voltage: 230 V
Heaters
Compact aluminum housings, convenient and durable DIN-rail mounting clamps, and heat-resistant cable insulation. The heating element does not overheat and the housing temperature does not exceed the specified limits.
Heaters
1
/1
Heaters
Used to maintain the required operating conditions of equipment installed inside electrical cabinets by heating the air and preventing condensation. Quick installation via snap-on DIN rail mounting and quick-connect terminals. Heating element — PTC thermistor Power at 23 °C: 15−350 W Protection rating: IP20 Temperature range: -45 °C to +70 °C Voltage range: 120−260 V AC
Thermostats
1
Control devices
A thermostat or hygrostat is used to control heater operation. A NO (normally open) thermostat is used to control fans and switches the fan on when the air temperature rises above the set value. A NC (normally closed) thermostat is used to control heaters and switches the heater off when the temperature drops below the set value. The NO+NC thermostat is ideal for controlling fans, heaters, and heat exchangers, as well as for monitoring temperature inside the cabinet. A hygrostat is used to activate a heater or fan depending on the air humidity level.
2
Hygrostat
/1
/2
Thermostats
Used to control fans and heaters to maintain the optimal temperature inside the cabinet. They ensure proper operating conditions for installed equipment and high energy efficiency of the overall solution. Quick installation via snap-on DIN rail mounting and quick-connect terminals. Setting range: 0 °C to +60 °C Maximum current: 10 A
Hygrostat
Used to control fans and heaters in order to maintain optimal relative humidity inside the cabinet. Quick installation via snap-on DIN rail mounting and quick-connect terminals. Setting range: 0 °C to +60 °C Maximum current: 5 A
Accessories
Replacement filters for filter grilles and fans. Protective covers to increase the protection rating to IP56. Louver panels for natural ventilation. Ventilation panels for MPx series cabinets
Replacement filters
1
2
Protective covers
3
Louver panels
4
Fan panel RV 38.38
5
Fan panels FC
/1
/2
/3
/4
/5
Replacement filters
For continuous operation of ventilation systems, the internal filter must be periodically cleaned and replaced when necessary. Filters are made of synthetic fiber with progressive filtration capability. Filtration class: G3 and G4
Protective covers
Designed to increase the protection rating of filter fans and filter grilles. Protection rating: IP54
Louver panels
Used for natural ventilation. Protection rating: IP22
Fan panel RV 38.38
An efficient solution for passive or active cooling using ambient air. Ideal for cost-effective heat dissipation in cabinets and can be mounted on any cabinet with sufficient top panel area. Free airflow: 272 m³/h with filter fan FA 15.230 FD, 480 m³/h with filter fan FA 20.230 FD
Fan panels FC
Suitable for installation in the top frame opening of MF series cabinets. Airflow can be increased using an additional FA 12.230 I fan kit. Free airflow: 330−990 m³/h Protection rating: IP20
Push-in технология (TPI)
Технология разработана для соединения провода напрямую и без инструмента. Пружина зажима Push-in особой формы позволяет без заметных усилий вставлять проводники. Незначительные усилия ввода значительно облегчают процесс кабельной разводки. При введении провода специальная контактная пружина зажима push-in, изготовленная из высококачественной пружинной стали, автоматически разжимается и обеспечивает необходимое усилие прижима к токовой шине.
Винтовой зажим (TB)
Винтовые клеммы с технологией Reakdyn, отвечают самым высоким требованиям. Система винтового зажима обеспечивает надежную защиту от самораскручивания винта, поэтому периодическая протяжка зажимных винтов не требуется. Медные проводники любого типа могут подключаться без предварительной подготовки. Имеется возможность подключения к одному контакту клеммы нескольких проводников. Высокая прижимная сила винтового зажима, в отличии от других типов зажимов, обеспечивает газонепроницаемость и долговечность соединения проводников сечением до 95 мм2.
Пружинная клетка (TS)
Пружинные соединения обеспечивают удобство подключения и интуитивное обслуживание. Пружина разжимается через рабочий паз с помощью отвертки. При этом отвертка фиксируется в открытой точке подключения. Зафиксированная отвертка удерживает точку подключения открытой и служит также для визуальной ориентации. После извлечения инструмента пружина прижимает проводник к сборной шине. Отсоединяется проводник аналогичным образом.
By submitting a request, you agree to the privacy policy
Microclimate control is essential
for reliable operation of electrical equipment
Environmental conditions can reduce performance or even damage equipment. Overheating, condensation, dust, and contamination are common problems in industrial environments.
— PROVENTO systems automatically maintain optimal temperatures, control humidity, and filter air.
/ CONTROL
We will become
your reliable partner
/ COOPERATION
Fast shipment and delivery
thanks to our extensive logistics network.
Best price-to-quality ratio on the market
achieved through large production volumes.
2D drawings and 3D models Available for designers and engineers
Unique PDS (Provento Data System) customer service system
helps control the entire sales chain and manage work with distributors or directly with Provento. Simple registration and intuitive interface.
2D чертежи и 3D модели клемм Провенто
Explore the full
Provento product range
You can also purchase other necessary products from us
such as DIN rails for mounting systems, terminal blocks, and ready-made enclosures. Receive the required product catalog directly on the website.
/ PROVENTO PRODUCT RANGE
A federal-level group of companies
We have been manufacturing products in Russia since 2001.
We are the first manufacturer of electrical enclosures on the market. Today we are market leaders and actively participate in the import substitution program. All our products are certified and comply with Russian quality standards and EAEU regulations.
/ ABOUT THE COMPANY
PROVENTO
Provento microclimate control systems have passed all required quality tests
have passed all required quality tests
/ CERTIFICATES
Provento microclimate control systems
Among our clients
are the largest enterprises and corporations
/ OUR CLIENTS
Among our clients
are the largest
enterprises and
corporations
/ SPECIFICATION RECALCULATION
If your project is designed using microclimate control systems from another manufacturer
recalculation
Order a specification
Leave a request
We will recalculate the specification in the near future
By submitting a request, you agree to the privacy policy
Contact us
in a convenient way
/ Phone
From 9:00 to 18:00 Moscow time
/ Email
/ Opening hours of the sales department
Leave a request and we will contact you
By submitting a request, you agree to the privacy policy
/ CONTACTS
Our address
Kudma rural settlement, Kudminskaya Industrial Zone N1, Nizhny Novgorod, 607 630, Russia, Nizhny Novgorod Region
